Hitachi CP-X505 - Manual (Page 19)

9
Adjusting the zoom and focus
.
Use the zoom ring to adjust the screen size.
.
Use the focus ring to focus the picture.
Operating
Focus ring
Zoom ring
Adjusting the lens shift
.
Use the vertical lens shift dial to shift
the picture upward or downward.
.
Use the horizontal lens shift dial to
shift the picture left or right.
Using the automatic adjustment feature
.
Press the AUTO button on the remote control.
 For an RGB signal
The vertical position, the horizontal position, the horizontal
phase and the horizontal size will be automatically adjusted.
And the aspect ratio will be automatically set to default. Make sure that the
application window is set to its maximum size prior to attempting to use this
feature. A dark picture may still be incorrectly adjusted. Use a bright picture
when adjusting.
 For an M1-D signal
The aspect ratio will be automatically set to default.
 For a video signal or s-video signal
The video format best suited for the respective input signal will be selected
automatically.
This function is available only when the AUTO is selected to the VIDEO
FORMAT item in INPUT menu (32) . For a component video signal, the
signal type is identified automatically independently of this function.
 For a video signal, s-video signal or component video signal
The vertical position, horizontal position and aspect ratio will be automatically
set to default.
 For a component video signal
The horizontal phase will be automatically set to default.
● The automatic adjustment operation requires about 10 seconds. Also please
note that it may not function correctly with some input.
BLANK LASER
ASPECT
ESC MENU RESET
POSITION AUTO
MAGNIFY MY BUTTON VOLUME
ON 1
MUTE
OFF 2
FREEZE KEYSTONE SEARCH
PUSH ENTER
PAGE UP PAGE DOWN
STANDBY/ON VIDEO RGB
LASER
INDICATOR
2/5
1/10
1/10
UP
DOWN
RIGHT
Lens shift cover
LEFT
NOTE • When the vertical lens
shift is adjusted, it is recommended to
shift the picture upward.
Top