Hitachi CP-X505 - Manual (Page 53)

53
NETWORK Menu
/'07= 4)$?  5'.'%6
+2#&&4'55
57$0'6/#5-
6+/'&+(('4'0%'
&*%2  674010
&'(#7.6)#6'9#;
&#6'#0&6+/'
G
 5*16
+0(14/#6+10
5'48+%'
+/#)'
2+%674'
5'672
+0276
5%4''0
126+10
#7&+1
0'6914-
'#5;/'07
NETWORK Menu
Item Description
DHCP
(Dynamic Host
Configuration
Protocol)
DHCP TURN ON/TURN OFF:
Use the ▲/▼ buttons to turn DHCP on/off
TURN ON ó TURN OFF
Select TURN OFF when the network does not have DHCP
enabled.
IP ADDRESS
Entering the IP ADDRESS :
Use the ▲/▼/◄/► buttons to enter the IP
ADDRESS. This function can only be used
when DHCP is set to “TURN OFF”.
• The IP ADDRESS is the number that identifies this projector
on the network. You cannot have two devices with the same IP
ADDRESS on the same network.
SUBNET MASK
Entering the SUBNET MASK :
Use the ▲/▼/◄/► buttons to enter the
same SUBNET MASK used by your PC.
This function can only be used when DHCP
is set to “TURN OFF”.
DEFAULT
GATEWAY
Entering the DEFAULT GATEWAY :
Use the ▲/▼/◄/► buttons to enter the
DEFAULT GATEWAY (a node on a computor
network that serves as an access point to
another network) address.This function can only
be used when DHCP is set to “TURN OFF”.
Consult with your network administrator before connecting to an
existing access point on your network. Incorrect network settings
on this projector may cause trouble on the network.
Select “NETWORK” from the main menu to access the following
functions.
Select an item using the ▲/▼ cursor buttons on the projector or
remote control, and press the ► cursor button on the projector or
remote control, or ENTER button on the remote control to execute
the item. Then perform it according to the following table.
NOTE • The factory default setting for DHCP is “TURN ON”. There is no need to set
up [DHCP], [IP ADDRESS], [SUBNET MASK] or [DEFAULT GATEWAY] if your network
has DHCP enabled. ( User’s Manual - Network Functions)
• If you are not utilizing SNTP ( User’s Manual - Network Functions), then you must
set the DATE AND TIME during the initial installation. Please refer to the item DATE
AND TIME on the following list.
&*%2
674010
67401((
192. 168. 254
IP ADDRESS
1.
255. 255. 0
SUBNET MASK
255.
0. 0. 0
DEFAULT GATEWAY
0.
(continued on next page)