Hitachi DZMV580A - Manual (Page 108)

English
108
SELECTING MULTIPLE SCENES
1
Press the DISC NAVIGATION button.
2
Use the joystick to select the desired scene.
3
Press the SELECT button once:
The selected scene will be framed in red and
yellow.
Repeat steps 2 and 3 to randomly select
multiple scenes.
To cancel a selected scene, select the scene to be
canceled, and then press the SELECT button.
To cancel all selected scenes, press the C button.
Note :
Although scenes can be randomly selected, playback will
always start from the lowest scene number.
SELECTING CONSECUTIVE SCENES TOGETHER
1
Press the DISC NAVIGATION button.
2
Use the joystick to select
the desired scene.
3
Hold down the SELECT
button for at least one
second:
The selected scene will
be doubly framed in
yellow and blue.
4
Use the joystick to select
the last scene in the
range you want, and
then press the A
button:
The thumbnails of
scenes in the specified
range will be framed in
red, and then selected.
Note
:
• You can know the status of scenes from the colors of
cursor and bargraph:
• Pressing the A button after selecting scenes will play
back only the selected scenes from the beginning of
each.
• You can also select scenes in reverse from the last scene
in the range.
• To release multiple selection, press the SELECT or C
button after step 4.
• Up to 999 scenes can be selected for both disc and card.
005 / 014 A l l Pr ogr ams
PLAY RAM
Yellow frame
005 / 014 A l l Pr ogr ams
RAM ENTER CANCEL
Double frames in
yellow and blue
010/ 014 A l l Pr ogr ams
RAM PLAY DESELECT ALL
When scenes up to this
point are selected
Red
frame
Cursor Bar graph Status of scenes
Yellow Light blue Current cursor position
Blue Light blue
Range of scenes being
selected
Red Red Scenes already selected