Hitachi DZMV580A - Manual (Page 154)

English
154
Uninstalling Software
Use the following procedure to uninstall (delete) any provided software that has been installed:
UNINSTALLING USB DRIVER
With Windows ® 98 Second Edition/Me:
1
Set the power switch on DVD video camera/
recorder to “O VIDEO”, and use the PC
connection cable to connect it to the PC.
2
Open “System” on Control Panel, and then
choose the “Device Manager” tab.
3
Delete HITACHI DVD-RAM DZ-MV5 in “CD-
ROM”.
If the file does not exist, proceed with the next
step:
4
Delete HITACHI DVD-RAM DZ-MV5 in “Disk
drives”.
If the file does not exist, proceed with the next
step:
5
Delete the following items in “Universal Serial
Bus controllers”:
Hitachi DVDCAM DVD Mode USB HS
Interface
USB Mass Storage Device For DVDCAM
If no item exists, proceed with the next step:
6
Close Device Manager.
If the message for restart appears, click “No”.
7
Delete the following files:
Windows ® 98 Second Edition:
C:\WINDOWS\INF\OTHER\Hitachi
Ltd.DZ3298.inf
C:\WINDOWS\SYSTEM\IOSUBSYS\dzmvpd
r.pdr
C:\WINDOWS\SYSTEM32\DRIVERS\DZMVU
MSS.sys
No extension may appear depending on the setting on
PC.
Windows ® Me:
C:\WINDOWS\INF\OTHER\Hitachi
Ltd.DZ32me.inf
No extension may appear depending on the setting on
PC.
If the INF folder cannot be found, use Explorer
to choose the “View” menu, “Folder Options”,
“View” tab, and then “Show all files”: Click
“OK” and then try again.
8
Disconnect the DVD video camera/recorder
from PC, and then restart the PC.