Hobart Welding Products OM-944 196 639G - Manual (Page 35)

OM-944 Page 31 Return To Table Of Contents
SECTION 8 − MIG WELDING (GMAW) GUIDELINES
8-1. Typical MIG Process Connections
Y Weld current can damage
electronic parts in vehicles.
Disconnect both battery
cables before welding on a
vehicle. Place work clamp as
close to the weld as possible.
Wire Feeder/
Power Source
Workpiece
Gun
Regulator/
Flowmeter
Gas Hose
Shielding Gas
Work Clamp
light mig 5/967 / Ref. 802 445-B