HONDA Motorcycle User Manual
Page 104
![background image](/manuals/96997/104/background.png)
Installation Notes:
Reverse the removal procedure to install the
wheel.
If a torque wrench was not used for installation,
see your authorized Honda dealer as soon as
possible to verify proper assembly. Improper
assembly may lead to loss of braking capacity.
•
Position the wheel between the fork legs and
insert the front axle shaft from the left side,
through the left fork leg and wheel hub.
•
When installing the wheel, fit the left brake disc
carefully between the brake pads to avoid
damaging the pads.
•
Tighten the axle bolt to the specified torque.
Axle bolt torque: 59 Nm(5.9 kg-m, 43 Ib-ft)
•
Tighten all the axle pinch bolts to the specified
torque. Axle pinch bolts torque: 22 Nm(2.2 kg-
m, 16 Ib-ft)
•
Install the caliper fixing bolts, and tighten to a
torque of: 27 Nm(2.7 kg-m, 20 Ib-ft)
Check the clearance (6) between the brake disc