HONDA Motorcycle - Manual (Page 105)

97
(7) and the caliper bracket (8) on each side
with a 0.7 mm feeler gauge (9) after installation. The
clearance should be at least 0.7 mm (0.03 in).
If the clearance is not 0.7 mm (0.03 in) or more,
loosen the left axle pinch bolt and pull the left
fork outward or push inward adjust the
clearance. Then tighten the axle pinch bolt to
the specified torque.
Axle pinch bolt torque:
22 N-m(2.2 kg-m, 16 Ib-ft)