HONDA Motorcycle - Manual (Page 108)

100
Installation Notes:
Reverse the removal procedure to install the
wheel.
If a torque wrench was not used for installation,
see your authorized Honda dealer as soon as
possible to verify proper assembly. Improper
assembly may lead to loss of braking capacity.
•
Tighten the rear wheel nuts to the specified
torque. Rear wheel nuts torque: 103 N·m(10
kg-m, 75 Ib-ft)
•
Check the clearance (5) between the rear tire
and the muffler. The clearance should be: 25-
35 mm(1.0-1.4 in)
•
After installing the wheel, apply the brake
several times and then check if the wheel
rotates freely. Recheck the wheel if the brake
drags or if the wheel does not rotate freely.
•
Operate the brake pedal and check the brake
operation.