When installing this product, Warning, Caution – Honeywell 69-1866-01 User Manual
Page 3
MEDIA AIR CLEANER
3
69-1866—01
IMPORTANT
Failure to replace the filter cartridge on a regular
basis may result in decreased system performance
and possible damage to HVAC components.
READ BEFORE YOU BEGIN
INSTALLING YOUR MEDIA AIR
CLEANER:
When installing this product...
1. This product is intended only for very experienced do-
it-yourself or professional installers. Installation of
this product requires disassembling and reassembling
furnace duct work. Depending on the application this
may require building metal duct transitions, re-routing
ductwork, or cutting holes in the furnace cabinet. If you
are not comfortable installing this product please con-
tact a licensed HVAC installer to have this device pro-
fessionally installed.
2. Read these instructions carefully before beginning.
Failure to follow them could damage the media air filter
or cause a hazardous condition.
3. Check the ratings given in the instructions and on the
media air cleaner to make sure the product is suitable
for your
application.
WARNING
Can cause personal injury or equipment damage.
Do not cut or drill into any air conditioning or electrical
accessory.
Disconnect furnace and accessory power supplies
before
installing or servicing media air cleaner.
CAUTION
Sharp Edges Installation Hazard. Can cause
personal injury.
Wear gloves and safety glasses when handling
media air cleaner or sheet metal components.
Included in the Box
This box contains the following items:
— Media Air Cleaner Cabinet and Door
— CF200 Media Air Filter
— Instruction Manual
Not Included
Depending on your installation you may need one or more of
the following to install the air cleaner:
— Duct Tape or Mastic
— Sheet-metal Screws, Rivets, or Slip-joints
— Sheet-metal Ducts (size depends on installation)
— Sheet-metal Transitions (depends on installation)
— Turning Vanes (depends on installation)
Required Tools
You will also need at least the following tools to complete the
installation:
Tin snips
Screwdrivers
Drill and drill bits
Pliers
Gloves
Safety Glasses