HP 1100dtn - Manual (Page 50)

3-6 ENWW
Using HP Web Jetadmin
HP Web Jetadmin is a Web-based system administration tool that allows remote installation
and management of networked peripherals from a Web browser. It enables network
administrators to configure network printers, manage printer features, and monitor printer
status, including levels for printer supplies.
HP Web Jetadmin supports IP-based networks only. This browser-based software can be
installed and hosted on one of the following supported platforms:
z Windows NT 4.0, 2000, or XP
z Red Hat Linux
z SuSE Linux
To download HP Web Jetadmin software and for the latest information, go to
http://www.hp.com/go/webjetadmin .
Using the deskjet control panel (DJCP)
Some software manufacturers do not develop printer drivers for their MS-DOS
®
programs.
The deskjet control panel (DJCP) can allow you to gain access to certain useful printer
features when you are printing from DOS. The DJCP utility allows you to do these tasks:
z Adjust print settings. (Printing using special features is not supported.)
z Specify the default printer from your DOS program.
z Set the symbol set for the language you are using in a document.
Note that changes made to settings in your DOS program may override changes made to the
same settings in the DJCP.
To install DJCP
1 Make sure the printer is set up and that the printer is turned on.
2 Insert the Starter CD into the CD drive.
3 At the DOS prompt, type the letter of the CD drive and press ENTER . For example, type
D: and press ENTER .
4 Change to the directory to drivers\dos\<language>\ , where <language> is the
language you prefer, and press ENTER .
5 Type install and press ENTER .
6 Follow the instructions on the screen to complete the installation.