Hobart Welding Products IRONMAN 230 - Manual (Page 20)

OM-235 281 Page 16
3-9. Installing 10 lb Wire Spool And Adjusting Hub Tension
242 147-A
1 Spool Hub
2 Spool Hub Adapter
3 Spool Hub Nut
4 Keyed Washer (2)
5 Compression Spring
6 Washer
7 Nut
Assemble components in numer-
ical order as shown.
Slide spool hub adapter up on hub
for the smaller spool making sure
it is positioned in the anti-rotation
notches.
Secure hub nut on spool hub ad-
aptor.
Position remaining components.
Hand tighten nut to create a slight
drag while rotating wire spool.
.
Over tightening nut may
cause wire slippage.
2
1
3
4
5
6
7
3-10. Installing 33 lb Wire Spool And Adjusting Hub Tension
242 148-A
1 Spool Hub
2 Spool Hub Adapter
3 Spool Hub Nut
4 Keyed Washer (2)
5 Compression Spring
6 Washer
7 Nut
Assemble components in numer-
ical order as shown.
Slide spool hub adapter up on hub
for the smaller spool making sure
it is positioned in the anti-rotation
notches.
Secure hub nut on spool hub ad-
aptor.
Position remaining components.
Hand tighten nut to create a slight
drag while rotating wire spool.
.
Over tightening nut may
cause wire slippage.
2
1
3
4
5
6
7