Husqvarna 16 - Manual (Page 18)

16
– English
DRIVING
Warm engine:
4. Set the throttle control midway between position
1 and 2.
WARNING!
Never run the engine indoors, in
enclosed or poorly ventilated
areas. The exhaust fumes contain
toxic carbon monoxide.
6. When the engine has started release the ignition
key to neutral position.
Push the throttle control to the required speed.
For cutting 3/4 to full throttle.
IMPORTANT INFORMATION
Do not run the starter for more than about
5 seconds at a time. If the engine does not
start, wait about 10 seconds before trying
again.
5. Turn the ignition key to start position.
1
2
3
STOP START
STOP START
6007-005H
6007-006
6007-007