Harbor Freight Tools Windsor Design 60" Workbench 69054 - Manual (Page 3)

Page 3 For technical questions, please call 1-800-444-3353. Item 69054
Specifications
Top Shelf Weight Capacity 250 lb.
Drawer Weight Capacity 25 lb. (per drawer)
Bottom Shelf Capacity 200 lb.
Vise Capacity 7"
Table Top Thickness 2-1/2"
Setup - Before use:
Read the entiRe impORtant SaFetY inFORmatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
note: For additional information regarding the parts listed in the following
pages, refer to Parts List and Diagram on page 10.
note: More than one person is needed for proper assembly.
note: In the supplied bag of hardware, the Nuts are already threaded onto the Screw (6).
1. Insert Connecting Nuts (8) into holes at end of Cross Braces (3).
Make sure that the slot on the Nuts align horizontally with the
Bolts (7). This will allow the Bolts to be threaded into the Cross
Braces. See Figure A, right.
2. Set the Cross Brace against a Leg (4) and use the Hex Wrench
(9) and Bolt (7) to fasten Cross Brace and Leg together.
See Figure B, right.
nOte: Make sure the groove in the Cross Brace is facing IN.
See Figures A and B.
Figure a
Connecting
Nuts (8)
Leg (4)
Cross Brace (3)
Figure B
Cross
Brace (3)
Leg (4)
Hex
Wrench (9)
Sa
Fet
Y
Ope
R
ati
O
n
m
aintenan
C
e
Setup