Harbor Freight Tools Windsor Design 60" Workbench 69054 - Manual (Page 8)

Page 8 For technical questions, please call 1-800-444-3353. Item 69054
17. Use the Drawer Screws (22) to fasten the Drawer Handles
(21) to the Drawer Front Panels (16). See Figure O, right.
note: Each Drawer piece should have a sticker designating what it
is (P1-P5). Use the Parts List as on page 10 as reference. This
will help assure correct assembly.
18. Fasten the Drawer Panel (18) and the Drawer Slot
Panel (19) to the Drawer Front Panel.
See Figure P, right.
19. Fasten the Drawer Back Panel to the ends of the two side
Panels. Then slide the Drawer Bottom (20) into the
grooves along the insides of the side panels, making sure
the felt side is up. See Figure Q, right.
Drawer Handle
(21)
Drawer Front
Panel (16)
Figure O
Figure p
Drawer Front
Panel (16)
Drawer Slot
Panel (19)
Screwdriver
Figure Q
Drawer Bottom
(20)
Drawer Slot
Panel (19)
Drawer Back
Panel (17)
Sa
Fet
Y
Ope
R
ati
O
n
m
aintenan
C
e
Setup