Honeywell TRUDRY DR90 - Manual (Page 2)

Installation Checklist
Included in This Box
A TrueDRY™ DR90 (1)
B 10-in. duct collar (2)
C 6-in. duct collar (1)
D MERV II Filter (1)
E Filter Door (1)
F Installation Guide
Control Options (sold separately)
G1 Prestige Comfort System
G2 True IAQ
G3 H8908 Manual Dehumidistat
G4 VisionPro IAQ Control
(included with DR90VPIAQ)
Tools Required (not supplied)
• 3/8-in. hex drive
• Drill or duct cutting tool
• Wire stripper/cutter
• Standard screwdriver
• Duct tape
• 10-in. round duct and starter
collar
• 18-22 gauge, 5 band
thermostat wire
• 1/2-in. diameter drain line (8 ft.)
• 1/2-in. drain clamps (2)
Options
• 1/2-in. drain p-trap (may be
required by local code)
• Drain pan
Warning: Installation must be
performed by a qualified service
technician and must comply
with local codes.
Remove power to the device
before installing or servicing the
device.
Failure to connect the device
according to these instructions
may result in damage to the
device or the controls.
INSTALLATION INSTRUCTIONS
BEGIN ON PAGE 1