Husqvarna Viking CA 150 - Manual (Page 3)

English – 3
CONTENTS
Contents Note the following before starting:
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify the
design and appearance of products without prior notice.
Long-term exposure to noise can result in permanent hearing
impairment. So always use approved hearing protection.
Please read the operator’s manual carefully and make sure
you understand the instructions before using the machine.
These instructions supplement the instructions that were
included with the machine. For other procedures, please refer
to the operating instructions for the machine.
The machine is only designed for cultivating.
KEY TO SYMBOLS
Symbols ....................................................................... 2
CONTENTS
Contents ...................................................................... 3
Note the following before starting: ................................ 3
SAFETY INSTRUCTIONS
Personal protective equipment ..................................... 4
Machine ′ s safety equipment ........................................ 4
General safety precautions .......................................... 5
General working instructions ....................................... 6
WHAT IS WHAT?
What is what on the cultivator attachment? ................. 7
ASSEMBLY
Fitting the bevel gear ................................................... 8
Assembling the guard. ................................................. 8
STARTING AND STOPPING
Check before starting ................................................... 9
MAINTENANCE
Bevel gear .................................................................... 10
Replacing the tine ........................................................ 10
Maintenance schedule ................................................. 10
TECHNICAL DATA
Technical data .............................................................. 11
!
WARNING! Under no circumstances may the
design of the machine be modified without
the permission of the manufacturer. Always
use genuine accessories. Non-authorized
modifications and/or accessories can result
in serious personal injury or the death of the
operator or others.
!
WARNING! This accessory may only be used
together with the intended clearing saw/
trimmer, see under heading ”Approved
accessories” in chapter Technical data in the
machine’s Operator’s Manual.