Personal protective equipment, Machine¢s safety equipment, Cutting attachment guard – Husqvarna Viking CA 150 User Manual

Page 4: Cutting equipment, Safety instructions, Machine ′′′′ s safety equipment

Advertising
background image

4 –

English

SAFETY INSTRUCTIONS

Personal protective equipment

GLOVES
Gloves should be worn when necessary, e.g., when fitting
cutting attachments.

HEARING PROTECTION

Wear hearing protection that provides adequate noise
reduction.

EYE PROTECTION

Always wear approved eye protection. If you use a visor then
you must also wear approved protective goggles. Approved
protective goggles must comply with standard ANSI Z87.1 in
the USA or EN 166 in EU countries.

BOOTS

Wear sturdy, non-slip boots.

CLOTHING

Wear clothes made of a strong fabric and avoid loose clothing
that can catch on twigs and branches. Always wear heavy,
long pants. Do not wear jewellery, shorts sandals or go
barefoot. Secure hair so it is above shoulder level.

FIRST AID KIT

Always have a first aid kit nearby.

Machine

′′′′

s safety equipment

This section describes the machine

s safety equipment, its

purpose, and how checks and maintenance should be carried
out to ensure that it operates correctly. See the ”What is
what?” section to locate where this equipment is positioned
on your machine.

The life span of the machine can be reduced and the risk of
accidents can increase if machine maintenance is not carried
out correctly and if service and/or repairs are not carried out
professionally. If you need further information please contact
your nearest service workshop.

Cutting attachment guard

This guard is intended to prevent loose objects from being
thrown towards the operator. The guard also protects the
operator from accidental contact with the cutting attachment.

Ensure that the guard is undamaged and is not cracked.

Replace the guard if it has been exposed to impact or is
cracked.

Cutting equipment

The tines are designed and machined to withstand the loads
resulting from cultivating.

The two basic rules:
1

Only use cutting attachments with the guards we
recommend! See the chapter on Technical data.

2

Check the cutting attachment for damage or cracks. A
damaged cutting attachment should always be replaced.

IMPORTANT! You must use approved personal protective
equipment whenever you use the machine. Personal
protective equipment cannot eliminate the risk of injury but
it will reduce the degree of injury if an accident does
happen. Ask your dealer for help in choosing the right
equipment.

!

WARNING! Listen out for warning signals or
shouts when you are wearing hearing
protection. Always remove your hearing
protection as soon as the engine stops.

!

WARNING! Never use a machine that has
faulty safety equipment! Carry out the
inspection, maintenance and service
routines listed in this section.

Advertising