Honeywell SMV 3000 - Manual (Page 205)

SMV 3000 Smart Multivariable
Transmitter,
Transmitter Models :
SMA110, SMA125, SMG170
34-SM-99-01
03/04
Addendum
(to User’s Manual
34-SM-25-02)
Overview Replacement Meterbody and Heads
The SMV 3000 Multivariable Transmitter, all Models, is now being shipped with
newly designed meter body and process heads. If a replacement meter body is needed,
it should be ordered from the Model Number stated on the meter body nameplate.
This number includes the letter “S” after the model number; for example,
SMA110S-xxx.
This new transmitter is functionally identical to previous models in that the working
ranges (Lower Range Limit to Upper Range Limit) and intended applications have not
changed. However, the specifications for the maximum Pressure Rating and/or for the
Overpressure Rating have been enhanced for some models. A summary of
specifications is given in Table 6.
The new version, which will continue as SMV 3000, differs only in the physical size
and form of the meter body, process head, and associated components
.
With exceptions noted in this addendum, information given in
34-SM-25-02 SMV 3000 Multivariable Transmitter User’s Manual
applies also to this newer design.
Installation, operation, maintenance, calibration, and troubleshooting tasks remain
virtually the same as for the previous version. Differences appear primarily in torque
specifications when replacing meter bodies, and in part numbering and part
recognition when replacing components or assemblies.
Related
Publications This addendum provides details for parts replacement for the new version of the
SMV 3000 Smart Multivariable Flow Transmitter. For specific information regarding
parts applicability, refer to the following publication.
34-SM-03-01
SMV 3000 Smart Multivariable Flow Transmitter
Specification and Model Selection Guide
03/04 34-SM-99-01 (Addendum to 33-SM-25-02) 1 of 8