Hitachi HCX5000I - Manual (Page 119)

A SSIGNING AN A CCOUNT C ODE S ELEC S ET 500A U SER G UIDE
2-48 HCXTD840, Issue 1, July 2001
Assigning an
account code
using an
autodial key You can use an autodial key to assign an account code
without interrupting a call. To use an autodial key:
At the beginning of a call...
1 Press the desired autodial key before dialing the
number.
During a call...
2 Press the desired autodial key any time during the
conversation. The autodial key lights to confirm the
account code has been assigned.
Assigning
account codes
to autodial
keys Each autodial key must be programmed with the
appropriate feature access code (either fixed or variable)
followed by the account code. If using a variable account
code, be sure to include a # sign at the end of the code. See
page 2-95 for instructions on programming autodial keys.
Assigning an
account code
using the
keypad To assign an account code using the keypad:
At the beginning of a call...
1 Dial the appropriate feature access code followed by
the account code.
2 Wait for dial tone.
3 Dial the desired number. Remember to include the
trunk access code (usually 9) if it is an outside call.