Hitachi HCX5000I - Manual (Page 58)

C HAPTER 1: A BOUT Y OUR S ELEC S ET 500A C ONFERENCING
HCXTD840, Issue 1, July 2001 1-47
6 To exit the conference without disconnecting the
other two parties, press <JOIN>. The conference is
still connected but out of your control. Press
<START> to hang up.
7 To place the conference on hold, press <HOLD>.
You can only hold a conference by pressing the
<HOLD> key. You cannot use soft park or hold loop
keys to hold a conference. You can only place a
conference on hold if your system is set up for
multiparty conferences.
8 To retrieve the held conference, press <START>, then
press the winking CAP representing the held
conference.