Préparation et vérifications avant utilisation, Preliminary preparation and checks – HONDA UMK435E User Manual

Page 29

Advertising
background image

29

GB

F

PRÉPARATION ET VÉRIFICATIONS AVANT UTILISATION

REMPLISSAGE DU RÉSERVOIR DE CARBURANT

La pression peut augmenter dans les récipients contenant de l'essence, du fait de la température

ambiante. Ouvrir le bouchon avec précaution pour éviter toute projection. Entreposer le carburant

dans un endroit frais, pour de courtes périodes et ne jamais le laisser au soleil.

PRÉCAUTION:

Nettoyer le bouchon du réservoir et ses abords pour éviter que des corps

étranger ne pénètrent dans le réservoir.

Remplir le réservoir de carburant en utilisant un entonnoir approprié ou un bidon

à bouchon verseur.

Pour plus de commodités, placer la machine en position d'utilisation.

Veiller à ce que l'appareil soit en position stable pendant cette opération, afin

qu'il ne se renverse pas.

L'essence est extrêmement inflammable, et dans certaines circonstances, explosive. Remplir le

réservoir dans un endroit aéré, moteur à l'arrêt. Ne pas fumer, ne pas approcher de flammes ou

d'étincelles près du lieu où le plein est effectué et près du lieu de stockage du carburant. Veiller à ne pas

trop remplir le réservoir d'essence (il ne doit pas y avoir d'essence dans le col de remplissage). Après

avoir fait le plein, s'assurer que le bouchon de réservoir soit correctement fermé. Faire attention de ne

pas renverser d'essence pendant le remplissage du réservoir. Les éclaboussures ou les vapeurs

d'essence risqueraient prendre feu. Avant la mise en marche du moteur, assurez-vous que l'essence

renversée a séché et que les vapeurs sont dissipées. Eviter le contact direct de l'essence sur la peau ou

de respirer les vapeurs. NE PAS LAISSER A LA PORTEE DES ENFANTS.

UMK425E

UMK435E

Capacité du réservoir

0,55 l

0,65 l

Carburant recommandé

Super sans plomb

SECURITE

B3 C12

PRELIMINARY PREPARATION AND CHECKS

FILLING THE FUEL TANK

The pressure inside fuel tanks may increase when the ambient temperature rises. The cap

should be removed with care to avoid any splashing of fuel. Fuel should be stored in a cool

place, for short periods of time, and must never be left in direct sunlight.

CAUTION:

Clean the fuel tank cap and its edges to prevent foreign bodies from entering

the tank.

Fill the fuel tank with a suitable funnel or a jerrycan with a suitable spout.

For easy filling, place the machine in the operating position.

Make sure that the machine remains in a stable position throughout this

operation so that it does not fall over.

Petrol is extremely flammable and, in some circumstances, it is explosive. Fill the fuel tank in a well

ventilated area with the engine switched off. Do not smoke and avoid any flames or sparks in the

area where filling is performed and where the fuel is stored. Do not overfill the fuel tank. (The fuel

level must be below the filler neck). After filling the tank, make sure that the tank cap is correctly

fitted. Take care not to spill fuel during the tank filling operation. Petrol splashes or vapours could

catch fire. Make sure that any spilled petrol has evaporated and that vapours have dispersed before

starting the engine. Avoid direct contact of petrol with the skin and do not breathe the vapours.

KEEP FUEL OUT OF REACH OF CHILDREN.

UMK425E

UMK435E

Tank capacity

0.55 l

0.65 l

Recommended fuel

Premium unleaded

SAFETY

B3 C12

Livre_D-GB-F.book Page 29 Mardi, 13. février 2007 8:10 08

Advertising
This manual is related to the following products: