HP A.06.10 - Manual (Page 37)

3. Configure Data Protector to send SNMP traps to the DP Cell Manager:
a. Using the Data Protector GUI Reporting context, set up all Notification
events to use:
• SNMP as delivery method
• Cell Manager system as the destination
Figure 2 Data Protector GUI Reporting Context
b. Add the Cell Manager hostname as trap destination to the OVdests file
in /etc/opt/omni/snmp (Data Protector 5.1)
/etc/opt/omni/server/snmp
(Data Protector 5.5 and above).
c. Disable filtering of SNMP traps by emptying the OVfilter file in
/etc/opt/omni/snmp
(Data Protector 5.1)
/etc/opt/omni/server/snmp (Data Protector 5.5 and above).
SNMP configuration on Windows
Configure the Windows system to forward its SNMP traps to the Operations Manager
Server as follows:
1. To enable Data Protector to send SNMP traps, run the command: omnisnmp
2. To set the SNMP mode execute the following command:
ovconfchg -ns eaagt -set SNMP_SESSION_MODE NO_TRAPD
Integration guide for HP Operations Manager for Windows 37