HONDA 2008 Fit - Manual (Page 107)

The heater uses engine coolant to
warm the air. If the engine is cold, it
will be several minutes before you
feel warm air coming from the
system. The flow-through ventilation system
draws in outside air, circulates it
through the interior, then discharges
it through vents near the tailgate.
Select and .
Set the fan to the desired speed.
Adjust the warmth of the air with
the temperature control dial.
Air conditioning places an extra load
on the engine. Check the high
temperature indicator (see page
). If the indicator begins to blink,
turn off the A/C until the indicator
goes off. Set the temperature to the lower
limit.
Make sure the A/C is off.
Select
and .
Set the fan to the desired speed.
you can
cool it down more rapidly by partially
opening the windows, turning on the
A/C, and setting the fan to
maximum speed in
.
Turn on the A/C by pressing the
button. The indicator in the button
comes on when a fan speed is
selected.
Make sure the temperature is set
to maximum cool.
Select
.
If the outside air is humid, select
recirculation mode. If the outside
air is dry, select
.
Set the fan to the desired speed.
1.
2.
3.
4.
1.
2.
3.
4.
5.
1.
2.
3.
63
If equipped
If the interior is very warm,
Using the Heater Using the A/C Ventilation
Vents, Heating, and A/C
104 2008 Fit
Table Of Contents Main Menu