HONDA 2008 Fit - Manual (Page 50)

A child seat with a tether can be
installed in any seating position in
the back seat.
Each rear outside seating position
has an anchorage point on the seat-
back, and the center seating position
has an anchorage point in the ceiling
near the tailgate.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
After properly securing the child
seat (see page
), route the
tether strap over the seat-back and
through the head restraint legs.
Attach the tether strap hook to the
anchor, making sure the tether
strap is not twisted.
Tighten the strap according to the
seat maker’s instructions.
1.
3.
2.
45
CONTINUED
Installing a Child Seat with a
Tether
Installing a Child Seat
Using an Outer Anchor
Dr
iv
er
and
P
asseng
er
Saf
e
ty
47
TETHER STRAP HOOK
ANCHOR ANCHOR
2008 Fit
Table Of Contents Main Menu