Tripped sensor warning and indication 1 2 3 4, Tripped sensor indication – HONDA ACCORD 08E51-SDA-100 User Manual

Page 18

Advertising
background image

18

© 2002 American Honda Motor Co., Inc. - All Rights Reserved.

Example 1:
If opening the trunk causes the alarm to be triggered, the Status LED will flash two
times, pause and repeat this sequence for 1 minute.
Example 2:
If the alarm is triggered twice, first by opening the door and then by opening the trunk,
the Status LED will flash once, pause, flash two times, pause and repeat this sequence
for 1 minute.

TRIPPED

STATUS LED

SENSOR

NUMBER OF FLASHES

Door

1

Trunk

2

Ignition Key Switch
Ignition Switch

3

Battery Disconnected
Glass Breakage

4

Hood

5

Tripped Sensor Indication

• After disarming the system, if the tripped sensor warning indicator appears, you can

identify which portion of the security system has been tripped by observing the
number of flashes as shown below.

• Information regarding the security system can be retrieved from the memory of the

systems main control unit.

Insert the ignition key.

Within 1 second after step 2, open the door.

Tripped Sensor Warning and Indication

1
2

3

4

Disarm the security system.
Close the door.

Within 1 second after step 3, remove the key from the ignition switch.
The status LED flashes to indicate which sensor(s) were tripped.

0

0

Advertising