HONDA ACCORD 08E51-SDA-100 - Manual (Page 20)

20
© 2002 American Honda Motor Co., Inc. - All Rights Reserved.
Remote Control Code Programming (Only vehicles not equipped with Standard Keyless Entry System)
How to Program Remote
Control Transmitters
1
3
• For steps 2 thru 12, each step must be completed within 5 seconds. Step 13 must be
completed within 10 seconds for each remote.
• Up to three remotes can be stored in memory.
• All remotes to be programmed must be on hand.
• A non-programmed remote will work for this procedure.
• Turn the ignition key to the LOCK (0) position to complete the programming procedure.
3
2
4
0
0
0
Disarm the security system.
Turn the ignition key to the ON (II)
position.
Press the LOCK or UNLOCK button on
the remote control transmitter.
Turn the ignition key to the LOCK (0)
position.
Turn the ignition key to the ON (II)
position. ON
LOCK
ON
ON
LOCK
LOCK
or
5