System controls, Arming mode (automatic manual) – HONDA ACCORD 08E51-SDA-100 User Manual

Page 7

Advertising
background image

© 2002 American Honda Motor Co., Inc. - All Rights Reserved.

7

Insert the ignition key.
Observe that the system beeps
twice.

The switching procedure is

The result

AUTOMATIC MODE

Not completed

No beep

MANUAL MODE

Completed

Beep twice

System Controls

Turn the ignition key from the ON (II) position to the LOCK (0) position.
Remove the key from the ignition switch.

Arming Mode
(AUTOMATIC MANUAL)

This section explains how to change the arming mode from AUTOMATIC to MANUAL.

Open a door and close it. (The EXIT delay starts.)

NOTE: Steps 3 thru 7 must be completed within 5 seconds.

Insert the ignition key.

Remove the ignition key from the ignition switch. (All the way out)

Insert the ignition key.

Remove the ignition key from the ignition switch. (All the way out)

1

2

3

4
5

6

7

0

0

0

0

0

0

LOCK

ON

within 5 seconds

Advertising