Document Outline

• Canon
  • Table of Contents
  • Camera Parts and Functions
    • Dual-mode Buttons DSj|
    • Using Battery Pack
    • BP-E77KIBEI/BP-E722 (option) | Battery Pack
    • Attaching Battery Pack lEgl
    • 1. Slide battery pack into power source compartment.
    • 2. Press battery pack until it clicks and locks in place.
    • Removing Battery Pack
    • 1. Slide and hold ВАТТ EJECT switch up.
    • 2. Pull battery pack out, as shown.
    • Charging Battery Pack
    • Using AC Power
    • CA-100 Compact Power Adapter
    • Using Car Battery
    • CB-110 Car Battery Adapter (option)
    • Attaching DC Coupler lEEl
    • 1. Insert DC-100 DC Coupler into power source compartment.
    • 2. Connect DC-100 cable to compact power adapter (or car battery adapter).
    • 1. Turn camera on by pressing OPERATE button.
    • 2. Press and hold SET button for more than 3 seconds. BKl
    • 3. Press + and - buttons to scan year display.
    • 4. Press SHIFT button when correct year is shown.
    • 5. Press + and - buttons to scan month display.
    • 6. Press SHIFT button when correct month is shown.
    • 7,9
      • 7. Press + and - buttons to scan day display.
      • 8. Press SHIFT button when correct day is shown.
      • 9. Press + and - buttons to scan hour display.
      • 10. Press SHIFT button when correct hour is shown.
    • 12
      • 11. Press -I- and - buttons to scan minute display.
      • 12. Press SET button when correct minute is shown.
  • Camera Preparations
    • Attaching Strap
    • SS-300 Shoulder Strap BigSl
    • WS-20 Wrist Strap (option) gan
    • Adjusting Diopter 27-a
    • Adjusting 180'' FiexiGrip with Integral Electronic Vievrfinder 27-B
    • Sports Finder 27-c •
    • 1. Attach power source.
    • 2. Turn camera on.
    • 3. Press EJECT button.
    • 4. Load video cassette and close video cassette compartment.
    • 5. Press SP/LP button to select tape mode.
    • 6. Turn grip to desired position.
    • Tape Counter
    • Recording Reminder
    • Video Cassette Warning з2-а
    • Battery Pack Warning з2-в
    • About Backlighting 32-c
    • Recording Using Tripod 32-D
    • Record Search (Assembly Editing) (CAMERA Mode)
    • 1. Place camera in record pause mode, icicgl
    • 2. Press -f or - button to scroll forward or backward to locate recording start position.
    • 3. Press start/stop button.
    • Record Review (camera Mode)
    • 1. Place camera in record pause mode. icgRl -
    • 2. Press Cs] button.
    • 3. Press start/stop button to resume recording.
    • Record search (to resume recording)
    • Record review jcHSl
  • Recording Date and Time (camera Mode)
    • 1. Place camera in record pause mode, icngii
    • 2. Press DATE button to select display for recording as follows:
    • 3. Make your recording as normal.
    • Subjects Not Suitable for Autofocus
    • Manual Focus
    • 1. Press AF/MANUAL button to select manual focus.
    • 2. Rotate zooming lever to telephoto end.
    • 3. Look through viewfinder and rotate focusing ring to focus on subject
    • 4. Use zooming iever to frame subject properly.
    • Focus Lock
  • Macro ROCOrdiriQ (camera Mode)
    • 1. Press AF/MANUAL button to select manual - focus.
    • 2. Rotate zooming lever to wide-angle end.
    • 3. Press and hold macro button on zooming lever and move lever into macro range.
    • 4. Approach subject to desired size in viewfinder.
    • 5. Use zooming lever within macro range for fine focusing.
    • 6. When macro recording is completed, reverse steps 2 and 3.
    • Power Zoom 41-A
    • Manual Zoom 4i-b
    • Wireless Zoom 4i-c
    • What is White Balance?
    • Auto White Balance
    • Subjects Not Suitable for Auto White Balance 42-a
    • White Balance Lock
    • 2,4
      • White Balance Lock Procedure
      • 1. Point camera lens at a white ol^ect (such as a sheet of paper) for 10 seconds, so it completely fills viewfinder.
      • 2. Press AWB/LOCK/GAIN UP button.
      • 3. Make your recording.
      • 4. Press AWB/LOCK/GAIN UP button again to reset auto white balance.
      • Attaching Video Light 44-a
      • 1. Insert video light plug into accessory shoe on the camera.
      • 2. Slide video light into accessory shoe until it stops.
      • Removing Video Light 44-b
      • 1. Press and hold lock release button.
      • 2. Slide video light out of accessory shoe.
      • Shooting with Video Light
      • 1. Place camera in record pause mode. Etf-l
      • 2. Press video light power button.
      • 3. Press start/stop button to start shooting.
      • 1. Press and hold AWB/LOCK/GAIN UP button for more than 3 seconds.
      • 2. Make your recording.
      • 3. Press AWB/LOCK/GAIN UP button for more than 3 seconds to cancel gain-up.
      • 1. Point camera at subject and compose scene in viewfinder.
      • 2. Press SHUTTER button.
      • 3. Make your recording.
      • 4. Press SHUTTER button to return to normal shutter speed.
      • Wireless Fade
      • 1. Place camera in record pause mode. iaa?i
      • 2. Press F. START/STOP button.
      • 3. When scene is recorded, press F. START/STOP button again.
      • 1. Place camera in record pause mode.
      • 2. Press SELF/INT. button.
      • Press + and - buttons to select desired mode.
      • 4. Press start/stop button to start recording.
      • 5. Press start/stop button again to stop recording.
      • Creating Character Titles
      • 1. Place camera in CAMERA mode.
      • 2. Press SET button to display title lines in viewfinder.
      • 3. Press SHIFT button to move the cursor to position where you want to start the title,
      • 4. Use + and - buttons to scan list of title characters.
      • 5. When the character you want is displayed, press SHIFT button again to move to next cursor position. ^2]
      • 6. Follow steps 4 and 5 until your title is complete.
      • 7. When the title is finished, press SET button.
      • 2. Press C. TITLE button to select the type of scrolling you want:
      • 3. Press SET button.
      • Creating Digital Titles
      • 1. Place camera in CAMERA mode.
      • 2. Frame your image and press MEMO button.
      • 3. Press COLOUR button to select desired colour.
    • 3,4
    • 3,4
      • Recording Titles
      • 1. Place camera in record pause mode.
      • 2. Press start/stop button to start recording.
      • 3. Press C. TITLE or DISPLAY button.
      • 4. Press C. TITLE or DISPLAY button again to end title recording.
      • Adjusting Image Density (Digital Title)
  • Playback Connection (play Mode)
    • Using TV with Audio/Video Input Terminals
    • Connection Procedure
    • Connection Procedure
    • a
      • Using TV with SCART Terminal
      • Connection Procedure STll^l©
      • Connection Procedure
      • Selecting Video Channel (European model)
      • 1. Turn TV on.
      • 2. Turn camera on.
      • 3. Press MODE SELECT button to select PLAY mode.
      • 4. Press >■ (PLAY) button to start playback.
      • 5. Set RF unit’s G/l selector using flat-edge screwdriver.
      • 6. Set TV and video channel selector to video channel (video channel selector is factory-set to CH 32).
      • Selecting Video Channel (Australian model)
      • 1. Turn TV on.
      • 2. Turn camera on.
      • 3. Press MODE SELECT button to select PLAY mode.
      • 4. Press >■ (PLAY) button to start playback.
      • 5. Set TV and video channel selector to video channel (video channel selector is factory-set to 1CH) using a flat-edge screwdriver.
      • 1. Turn camera on.
      • 2. Press MODE SELECT button to select PLAY mode.
      • 3. Press EJECT button.
      • 4. Load video cassette in camera and close video cassette compartment.
      • 5. Locate playback start point.
      • 6. Press > (PLAY) button to start playback.
      • 7. Press ■ (STOP) button to end playback.
      • 8. Turn camera off.
      • PLAY Mode
      • High-Frequency Feedback
  • Special Playback Methods
    • A. Fast Forward Playback
    • B. Rewind Playback
    • C. Still Playback
    • Tap© R©tUrn (PLAY Mode)
    • 1. When you locate a scene during playback that you want to watch again later, press COUNTER RESET button.
    • 2. Press ■ (STOP) button when playback finishes.
    • 3. Press TAPE RETURN button.
    • 4. Press ► (PLAY) button.
  • Editing to Another VTR (PLAY Mode)
    • Connection Procedure STIIIRE©
    • Connection Procedure
    • Preparations TV
    • VTR
    • Adding Tities
  • Carrying Cases
    • o oe
      • SC-800 Soft Carrying Case
      • HC-60 System Case
  • Optional Accessories
    • CB-110 Car Battery Adapter
    • BP-E722 Battery Pack
    • MC-100 Multi-battery Charger
    • RS-60 Rain Shield
    • VL-20 Battery Video Light
    • TL-37 Tele-converter
    • WD-37 Wide-converter
    • FS-37 Filter Set
    • FS-37U Filter Set
    • MM-200 Stereo Mixing Microphone
    • ZM-100 Stereo/Zoom Microphone
    • MB-100 Microphone Boom
    • SA-1 Adapter Bracket
  • Problems and Troubleshooting
    • The following warnings may appear in viewfinder:
    • Smear
    • Poor playback picture on TV monitor liHa
  • Condensation (DEW)
    • What is condensation?
    • Condensation is iikeiy to occur when:
    • Preventing condensation
    • When condensation is detected
    • To start using camera again
  • Cautions
    • B
    • H
      • F. Always Replace the Lens Cap.
      • G. Do Not Expose the Camera to Shock or Vibrations.
      • H. Avoid Sudden Changes in Temperature.
      • I. Do Not Disassemble the Camera.
      • J. Using the Battery Pack and Recommended Accessories.
      • Using Your Battery Packs Effectively
      • Immediately After Purchase
      • General Use
      • storage
      • Terminology
      • Maintenance
      • Keep the Heads Clean.
      • Clean the Camera with a Soft, Dry Cloth.
      • Store the Camera Properly.
      • Store Cassette Tape Properly. '
      • Check the Operation of Each Component.
  • Specifications
    • Australian model
  • Canon
    • I- fí''.'!iн' "