Attach power source, Turn camera on, Press eject button – Canon E 250 User Manual
Page 40: Press sp/lp button to select tape mode, Turn grip to desired position, Camera recording, Mode), Camera
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Camera Recording (
camera
Mode)
v_
PAUSE
0^
0
:
00:00
1. Attach power source.
• When using a battery pack, make sure it is fully charged
(see p. 17).
2. Turn camera on.
• Mode indicator lights up red.
____
• TAPP flashes in viewfinder (see p. 32).
3. Press EJECT button.
• Video cassette compartment opens.
• EJECT button works with the power turned off, if the battery
pack is attached.
4. Load video cassette and close video cassette
compartment.
• Use an 8mm video cassette marked with an 0 (P5 type).
• Camera goes into record pause rrKxfe. ktaa
5. Press SP/LP button to select tape mode.
• For best picture quality, select SP.
• For double recording time, select LP.
6. Turn grip to desired position.
• See p. 27 for adjusting grip.
28