Press -i- and - buttons to scan minute display, Press set button when correct minute is shown – Canon E 250 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
12
SET
2-3S PM
20.MA» 1993
11. Press -I- and - buttons to scan minute display.
• Minute display rotates through 60 minutes.
V
hwìm
p»00 ■»-»• 01
.....
................. 58 •*-» 59<-|
12. Press SET button when correct minute is
shown.
• Minute display stops flashing and auto date and time starts
functioning. r-tBsi
• Press DATE button to make display disappear from
viewfinder.
Notes:
• The date can be set between 1 January, 1992, and December 31, 2010.
• Date and time cannot be set during camera recording or in PLAY mode.
• Be sure to connect a power source to the camera before changing lithium battery, otherwise, date and
time will be cleared from memory and will have to be reset.
• Reset date and time when you travel to a different time zone.
• To make a partial change to date or time settings, follow steps 1 and 2 on page 21. Then press SHIFT
button to select settings to change. When finished, press SET button.
24