Document Outline

• 1 General PRELIMINARY REMARKS
  • 1.1 About this Manual
  • 1.2 Important Notice
  • 1.3 Contact for Inquiries
• 2 SYSTEM DESCRIPTION
  • 2.1 System Overview
  • 2.2 Range of Application
  • 2.3 Features
  • 2.4 Configuration Software
• 3 INSTALLATION
  • 3.1 Mounting / Fixing
  • 3.2 Protective System
  • 3.3 Ambient Temperature
  • 3.4 Front panel / Pin Assignment
  • 3.5 Connection
  • 3.6 Power Supply
  • 3.7 Bus Connection
  • 3.8 Sensor Connection
  • 3.9 Several Sensors at one Data Logger
  • 3.10 Module Jack
• 4 SIGNAL PROCESSING
  • 4.1 Analogue Inputs
  • 4.2 Digital Inputs/Outputs
  • 4.3 Power Switch
  • 4.4 Internal Reference Voltage, Offset- and Drift Correction
  • 4.5 Internal Processing
  • 4.6 Scan Rate and Power Consumption
  • 4.7 Signal Processing
• 5 FUNCTIONAL DESCRIPTION
  • 5.1 Analogue Input Channel
    • 5.1.1 Voltage Measurement
    • 5.1.2 Current Measurement
    • 5.1.3 Resistance Measurement
  • 5.2 Digital Input Channel
    • 5.2.1 Digital Status Recording
    • 5.2.2 Frequency Measurement
    • 5.2.3 Progressive Counter
  • 5.3 Digital Output Channel
    • 5.3.1 Digital Status Output
  • 5.4 Arithmetic Channel
  • 5.5 Setpoint Channel
  • 5.6 Alarm Channel
  • 5.7 Serial Channel
  • 5.8 Threshold Values
  • 5.9 Error Handling
• 6 DISPLAY / MENU OPERATION
  • 6.1 Display and Operation
  • 6.2 Menu Items
  • 6.3 SD-Card
    • 6.3.1 Remove Card
    • 6.3.2 Firmware Update
• 7 DATA STORAGE
  • 7.1 General Remarks to Data Storage
  • 7.2 Modes of Data Storage
  • 7.3 Storage Medium
  • 7.4 Internal Data Storage
  • 7.5 External Data Storage with SD Card
• 8 Master function
  • 8.1 Master Function
• 9 INITIATION AND TEST
  • 9.1 Before Connecting the Device
  • 9.2 After Connecting the Device
  • 9.3 Configuration of the Data Logger
• 10 STRUCTURE OF THE BUS TOPOLOGY
  • 10.1 Bus Interface
  • 10.2 Bus Structure
  • 10.3 Transmission Speed and Line Length
  • 10.4 Bus Cable
  • 10.5 Bus Plug
  • 10.6 Bus Termination
  • 10.7 Shielding
  • 10.8 PC Bus Connection
  • 10.9 Potential Equalization
  • 10.10 Adjustment of Address and Baud Rate
• 11 COMMUNICATION
  • 11.1 Bus Interface
  • 11.2 Bus Protocol
  • 11.3 Data Format
  • 11.4 Output Format
  • 11.5 Transmission Sequence
  • 11.6 ASCII protocol
    • 11.6.1 Telegram Format for the ASCII Protocol
    • 11.6.2 Instruction Set in the ASCII-Protocol
  • 11.7 PROFIBUS protocol
    • 11.7.1 Telegram Format for the Profibus Protocol
    • 11.7.2 Instruction Set in the PROFIBUS-Protocol
  • 11.8 MODBUS protocol
    • 11.8.1 Telegram Format for the MODBUS-RTU Protocol
    • 11.8.2 Instruction Set in MODBUS-RTU Protocol
  • 11.9 Sample Program
  • 11.10 Autocall Function
  • 11.11 Modem Connection
• 12 WEBSERVER
  • 12.1 General
  • 12.2 System Info
  • 12.3 System Log
  • 12.4 Data View
  • 12.5 Data Logger
  • 12.6 Configuration / Login
  • 12.7 Single Channel Configuration
  • 12.8 Power Switch
  • 12.9 Serial Channel
  • 12.10 Logger Configuration
  • 12.11 Password
  • 12.12 Protocol
  • 12.13 Logout
• 13 SPECIFICATIONS
  • 13.1 Power Supply
  • 13.2 Signal Inputs/Outputs
  • 13.3 Signal Processing
  • 13.4 Analogue Inputs (8 per Module)
  • 13.5 Digital Inputs/Outputs (6 per Module)
  • 13.6 Interfaces
  • 13.7 Operating Conditions
  • 13.8 Electromagnetic Compatibility
  • 13.9 Shell
  • 13.10 Circuit
  • 13.11 Accessories / Notice for Orders
• 14 SIMPLIFIED DRAWINGS
  • 14.1 Front View