Document Outline

• 1 Overview
  • 1.1 Meter MultiLab 4010-2
  • 1.2 Sensors
    • 1.2.1 IDS sensors
    • 1.2.2 IDS adapter for analog sensors
    • 1.2.3 Automatic sensor recognition
• 2 Safety
  • 2.1 Safety information
    • 2.1.1 Safety information in the operating manual
    • 2.1.2 Safety signs on the meter
    • 2.1.3 Further documents providing safety information
  • 2.2 Safe operation
    • 2.2.1 Authorized use
    • 2.2.2 Requirements for safe operation
    • 2.2.3 Unauthorized use
• 3 Commissioning
  • 3.1 Scope of delivery
  • 3.2 Power supply
  • 3.3 Initial commissioning
    • 3.3.1 Connecting the power pack
• 4 Operation
  • 4.1 General operating principles
    • 4.1.1 Keypad
    • 4.1.2 Display
    • 4.1.3 Status information
    • 4.1.4 Instrument connectors
    • 4.1.5 Channel display
    • 4.1.6 Sensor info
    • 4.1.7 Display of several sensors in the measuring mode
  • 4.2 Switching on the meter
  • 4.3 Switching off the meter
  • 4.4 Login with user name
  • 4.5 Navigation
    • 4.5.1 Operating modes
    • 4.5.2 Measured value display
    • 4.5.3 Menus and dialogs
    • 4.5.4 Example 1 on navigation: Setting the language
    • 4.5.5 Example 2 on navigation: Setting the date and time
• 5 pH value
  • 5.1 Measuring
    • 5.1.1 Measuring the pH value
    • 5.1.2 Measuring the temperature
  • 5.2 pH calibration
    • 5.2.1 Why calibrate?
    • 5.2.2 When do you have to calibrate?
    • 5.2.3 Carrying out automatic calibration (AutoCal)
    • 5.2.4 Carrying out a manual calibration (ConCal)
    • 5.2.5 Calibration points
    • 5.2.6 Calibration data
    • 5.2.7 Continuous measurement control (CMC function)
    • 5.2.8 QSC function (sensor quality control)
• 6 ORP voltage
  • 6.1 Measuring
    • 6.1.1 Measuring the ORP
    • 6.1.2 Measuring the relative ORP
    • 6.1.3 Measuring the temperature
  • 6.2 ORP calibration
• 7 Ion concentration
  • 7.1 Measuring
    • 7.1.1 Measuring the ion concentration
    • 7.1.2 Measuring the temperature
  • 7.2 Calibration
    • 7.2.1 Why calibrate?
    • 7.2.2 When to calibrate?
    • 7.2.3 Calibration (ISE Cal)
    • 7.2.4 Calibration standards
    • 7.2.5 Calibration data
  • 7.3 Selecting the measuring method
    • 7.3.1 Standard addition
    • 7.3.2 Standard subtraction
    • 7.3.3 Sample addition
    • 7.3.4 Sample subtraction
    • 7.3.5 Standard addition with blank value correction (Blank value addition)
• 8 Dissolved oxygen (D.O.)
  • 8.1 Measuring
    • 8.1.1 Measuring D.O.
    • 8.1.2 Measuring the temperature
  • 8.2 Calibration
    • 8.2.1 Why calibrate?
    • 8.2.2 When to calibrate?
    • 8.2.3 Calibration procedures
    • 8.2.4 1-point calibration
    • 8.2.5 2-point calibration
    • 8.2.6 Calibration data
• 9 Conductivity
  • 9.1 Measuring
    • 9.1.1 Measuring the conductivity
    • 9.1.2 Measuring the temperature
  • 9.2 Temperature compensation
  • 9.3 Calibration
    • 9.3.1 Why calibrate?
    • 9.3.2 When to calibrate?
    • 9.3.3 Determining the cell constant (calibration in control standard)
    • 9.3.4 Calibration data
• 10 Settings
  • 10.1 pH measurement settings
    • 10.1.1 Settings for pH measurements
    • 10.1.2 Buffer sets for calibration
    • 10.1.3 Calibration interval
  • 10.2 ORP measurement settings
  • 10.3 ISE measurement settings
  • 10.4 D.O. measurement settings
    • 10.4.1 Settings for D.O. measurement
    • 10.4.2 Enter Sensor Cap coefficients
    • 10.4.3 Saturation local
  • 10.5 Cond measurement settings
    • 10.5.1 Settings for IDS conductivity sensors
  • 10.6 Sensor-independent settings
    • 10.6.1 System
    • 10.6.2 Data storage
    • 10.6.3 Automatic Stability control
  • 10.7 Reset
    • 10.7.1 Resetting the measurement settings
    • 10.7.2 Resetting the system settings
• 11 Data storage
  • 11.1 Manual data storage
  • 11.2 Automatic data storage at intervals
  • 11.3 Measurement data storage
    • 11.3.1 Editing the measurement data storage
    • 11.3.2 Erasing the measurement data storage
    • 11.3.3 Measurement dataset
    • 11.3.4 Storage locations
• 12 Transmitting data
  • 12.1 Outputting current measurement data
  • 12.2 Transmitting data
  • 12.3 Connecting the PC / USB-B interface (USB Device)
  • 12.4 Connecting a USB memory device/USB printer (USB-A interface (USB Host))
  • 12.5 Options for data transmission to the USB-B (PC) interface and the USB-A (USB printer) interface
  • 12.6 Data transmission to the USB-A interface (USB memory device)
  • 12.7 MultiLab Importer
  • 12.8 BOD Analyst Pro
• 13 Maintenance, cleaning, disposal
  • 13.1 Maintenance
    • 13.1.1 General maintenance activities
    • 13.1.2 Exchanging the battery
  • 13.2 Cleaning
  • 13.3 Packing
  • 13.4 Disposal
• 14 What to do if...
  • 14.1 pH
  • 14.2 ISE
  • 14.3 Dissolved oxygen
  • 14.4 Conductivity
  • 14.5 General information
• 15 Technical data
  • 15.1 Measuring ranges, resolution, accuracy
  • 15.2 General data
• 16 Firmware update
  • 16.1 Firmware update for the meter MultiLab 4010-2
  • 16.2 Firmware-Update for IDS Sensors
• 17 Glossary
• 18 Index
• 19 Appendix
  • 19.1 Oxygen solubility table
  • 19.2 DO% Calibration values
• 20 Contact Information
  • 20.1 Ordering & Technical Support
  • 20.2 Service Information