2 data storage, 3 automatic stability control, 2 data – YSI MultiLab 4010-2 User Manual
Page 96: 3 automatic st, Section 10.6.3 a, Utomatic, Tability, Control, Ee section 10.6.3 a, Bility
Settings
MultiLab 4010-2
96
ba76142e03
08/2013
10.6.2 Data storage
This menu contains all functions to display, edit and erase stored measured
values.
10.6.3 Automatic Stability control
The automatic Stability control (AutoRead) function continuously checks the
stability of the measurement signal. The stability has a considerable impact on
the reproducibility of measured values.
You can activate or switch off the automatic Stability control function (see
section 10.6 S
The measured parameter flashes on the display
as soon as the measured value is outside the stability range
when you switch over between the measured parameters with <M>.
when the automatic Stability control is switched off.
Detailed information on the memory functions of the
MultiLab 4010-2 are given in section 11 D