Document Outline

• Table 1. Specifications 1-2
• Preface
  • About ZyXEL omni.net series ISDN Terminal Adapters
  • Other References
• Introduction
  • Key Features
    • Speed and Compatibility
    • Intelligent Features
  • Specifications
    • Key Features Summary
  • Installing Your ZyXEL omni.net ISDN TA
• Using ZyXEL® ISDN Configuration Manager
  • About ZyXEL ISDN Configuration Manager
  • Start using ZyXEL ISDN Configuration Manager
    • Configuring ISDN Parameters
• LCD Panel Operation (for ZyXEL omni.net LCD/LCD+M)
  • LCD panel
  • Control Panel Description
  • LCD Panel Functions
  • LCD Panel Operation Keys
  • LCD Panel Display
    • Idle Screen
    • Clock Options
    • Dial In Log Options
    • Stored Phone List Options
    • Dial Out Log Options
• ISDN Communication Basics
  • Understanding AT Commands
    • Examples of AT Commands
    • Additional AT Command Set for Internal Fax/Modem (for ZyXEL omni.net LCD+M only)
    • Supported AT Command Types
  • Outgoing Calls
    • Dialing Data Calls
    • Dial Out Voice Calls (for ZyXEL omni.net LCD/LCD+M//Plus)
    • Dialing Out using internal Fax/modem (for ZyXEL omni.net LCD+M)
    • Dialing Out Using ISDN Mode Optional Speech Bearer Service
    • Manually Switching Communication Mode (for ZyXEL omni.net LCD/LCD+M/Plus)
    • Placing a Data Call
    • Multi-Auto Dial Out (MDO) for Outgoing Data Calls
  • Incoming Calls
    • Answering a Call Using MSN
    • Data Over Speech Channel (for ZyXEL omni.net LCD/LCD+M/Plus)
    • Best-effort Call Answering (for ZyXEL omni.net LCD/LCD+M/Plus)
    • Ambiguity Resolution Switch for Voice Calls (for omni.net LCD/LCD+M/Plus)
• Supplementary Service (for ZyXEL omni.net LCD/LCD+M/Plus)
  • To Implement the Supplementary Services
  • Call Waiting
    • Put your current call on hold and answer an incoming call
  • Call Hold/Retrieve
    • Switch back and forth between two callers
    • Hang-up your current call before answering an incoming call
    • Disconnect the second call and switch back to the first call
  • Three Way Conferencing
    • Starting a conference call
    • Canceling the conference call (for DSS1 switch only)
    • Dropping the last call added to the 3-way conference call (USA only)
    • Leaving the conference call, while the other two parties connected (USA only)
  • Call Forwarding
    • For DSS1 switch
  • Reminder Ring (USA NI-1 & DMS-100 switch)
  • Message Waiting (USA NI-1 & DMS-100 switch)
  • Call Transfer (USA NI-1 & DMS-100 switch)
• Feature Phone Operation(for omni.net LCD/LCD+M/Plus)
  • The Flash Key
    • Flash Key Commands
  • InterCom
  • Call Waiting
  • Receiving a Second Call
  • Call Broker
  • Call Reject
    • To disconnect caller C and switch back to caller B
  • Call Transfer
  • Three-Way Conference Call
    • Conference Call (1 local and 2 remote call)
    • Conference Call (2 local and 1 remote call)
  • Last Number Redial
  • Quick Dial
• Point-to-Point Protocol (PPP)
  • Introduction to PPP
  • Feature List
    • Async to Sync Conversion
    • Authentication Conversion
    • Compression Control Protocol (CCP)
    • Multilink PPP
    • Call Bumping
    • Bandwidth On Demand (BOD)
    • BACP/BAP
• V.110, V.120, X.75 and Synchronous Mode ISDN Communications
  • About V.110, V.120 and X.75 ISDN Protocols
  • Answering V.110, V.120, and X.75 Calls
  • Placing V.110, V.120, and X.75 Outgoing Calls
    • V.110 Outgoing Protocol
    • V.120 Outgoing Protocol
    • X.75 Outgoing Protocol
    • Synchronous Connections (for omni.net LCD/LCD+M)
  • Making V.120 and X.75 Bundled Calls
    • Speeds of 128Kbps
    • Identifying your Line Provisioning
    • V.120 Bundled Call
    • X.75 Bundled Call
    • Dialing Pre-stored Phone Numbers
  • Using V.42bis Data Compression
    • Bundle Connection with V.42bis Data Compression
    • Error Correction and Data Compression with V.120
    • Data Compression with X.75
  • Selecting V.120 for European ISDN (DSS1)
  • Security Settings
    • Setting and Modifying Passwords
    • Modifying the Supervisory Password
    • Modifying the User Passwords
    • Non-password Auto Call Back Function
• Internal Fax/Modem Function(for ZyXEL omni.net LCD+M only)
  • Internal Fax/Modem Basics
    • Modem Standards and Speeds
    • MNP Protocols
    • Xmodem, Ymodem, and Zmodem
    • Fax and Facsimile
    • Modem as a fax
    • EIA Class 1 Fax Commands
  • Constriction of Using Internal Fax/Modem and Phone2
    • Manually Switching Communication Modes
    • Incoming Calls for internal Fax/modem
  • LCD Panel When Internal Fax/Modem Operation
  • Fax Operation
    • Fax Command Sets
  • Internal Fax/Modem AT Command Set Summary
• Diagnostics
  • Diagnostic Tests
    • Power-on Self-test
    • ISDN Loopback Test (AT&T9)
    • Loopback with Self-Test (AT&T10)
    • B1/B2 Loopback with Self-Test (AT&T11)
    • The Diagnostic Command (ATCG)
  • Resetting Your omni.net
  • Using the Embedded Protocol Analyzer (EPA)
    • Capturing the Protocol Data
    • Analyzing the Captured Data
• Firmware Upgrade
  • Upgrading with Flash EPROM
  • Kernel Mode
  • Operation Modes of the DTE Interface
    • Simplex mode
    • Multiplex mode
  • AT Commands Description
    • AT Commands Prefix (AT)
  • Basic 'AT' Command Set
    • Description of ATI3 Output
  • Extended 'AT&' Command Set
  • Extended 'AT*' Command Set
    • Fax Command
  • Viewing and Setting S-Registers
  • S-Register Descriptions
  • Basic S-Registers 'ATSn=x'
  • Extended S-Registers "ATSn=x"
  • 'ATXn' Result Code Option Table