ZyXEL Communications omni.net Plus - Manual (Page 157)

Technical Reference for ZyXEL omni.net series
B-5
Basic S-Registers 'ATSn=x'
All the Following Commands Require a 'AT' Prefix
S Com. Function & Description +Definition
S0= Set the number of rings on which the omni.net will answer.
A '0' value disables auto-answer.
+000
S1= Counts and stores number of rings from an incoming call. +000
S2= Define escape code character, default <+> (43 dec.). +043
S3= Define ASCII Carriage Return. +013
S4= Define ASCII Line Feed. +010
S5= Define ASCII Backspace. +008
S7= Set duration, in number of seconds, omni.net waits for a connection. +060
S8= Set duration, in seconds, for pause (,) option in Dial command and pause
between command re-executions for Repeat (>) command. +002
Table 73. Basic S-Registers 'ATSn=x'