ZyXEL Communications omni.net Plus - Manual (Page 29)

Technical Reference for ZyXEL omni.net series
2-3
Step 2. After checking all active serial communication ports, the ZyXEL ISDN Configuration
Manager automatically detects which communication port is connected to your ZyXEL omni.net
ISDN TA.
If the ZyXEL ISDN Configuration Manager can not find your ZyXEL omni.net ISDN TA, it will
prompt you with the Port Setup dialog-box, as shown in the following illustration:
Figure 2. The Com Port Setting of ZyXEL ISDN Configuration Mangaer
1. In most cases, you only
need to change Port selection
to reflect the physical
connection of your omni.net.
Please select the correct COM
Port (COM1 to COM4).
2. Click here to open the
Configuration Manager’s
Posrt Setup dialog-box.