ZyXEL Communications omni.net Plus - Manual (Page 143)

Technical Reference for ZyXEL omni.net series
A-9
All the Following Commands Require a 'AT' Prefix
AT Com. Options Function & Description Reference
P4 AT&T custom point-to-point
P5 AT&T custom point-to-multipoint (1 SPID)
P6 AT&T custom point-to-multipoint (2 SPID)
Qn n=0-2 Result code displayed S23b7
Q0 (*) omni.net returns result code.
Q1 omni.net does not return result code.
Q2 omni.net returns result code but quiet after answering on a RING.
(will not show in AT&Vn) S40b1
QPn n=1-3
QP1 Display the setting of quick dial (speed dial) numbers.
QP2 Display the call-out history.
QP3 Display the call-in history.
Sr.b=n Set bit 'b' of S-register 'r' to value 'n'.
'n' is a binary digit '0' or '1'.
Sr.b? Display value of bit 'b' of S-register 'r'
Sr=n Set S-register 'r' to value 'n'.
'n' must be a decimal number between 0 and 255.
Sr? Display value stored in S-register 'r'.
SD? Display current Date of omni.net LCD.
SD=yyyy/mm/dd Set Date of omni.net LCD.
(Note: yyyy:year, mm:month, dd:day)
ST? Display current Time of omni.net LCD.
ST=hh:mm:ss Set Time of omni.net LCD.
(Note: hh:hour, mm:munite, ss:second)
SPIDr=nnn… User enters Service Profile ID 'nnn' (SPID), (USA only).
SPID0 First SPID number.
SPID1 Second SPID Number, if any.
SPID? Display the SPID setting(s), (USA only).
SWR Software reset S38b2