ZyXEL Communications omni.net Plus User Manual
Page 142
Technical Reference for ZyXEL omni.net series
A-8
All the Following Commands Require a 'AT' Prefix
AT Com.
Options
Function & Description
Reference
I9
Display Microsoft PnP code.
I11
Display PPP status.
JAn
n=0-255
(48 *)
Add-threshold for PPP/MP Bandwidth-On-Demand
in Kbps unit
S126
JSn
n=0-255
(32 *)
Sub-threshold for PPP/MP Bandwidth-On-Demand
in Kbps unit
S127
KAxn
n=0-63
(0 *)
Add-persist time interval for BOD; BOD disabled if n=0.
x= M(in Minute unit) or S(in Second unit)
S85b1-7
KSxn
n=0-63
(0 *)
Sub-persist time interval for BOD; BOD disabled if n=0.
x= M(in Minute unit) or S(in Second unit)
S125b1-7
Ln
n=0-3
to control speaker volume
S24b4-5
L0
Low
volume.
L1
Low volume. (Default.)
L2
Medium
volume.
L3
High
volume.
Mn
n=0-3
select when the speaker will be on or off
S21b1-2
M0
Speaker is always off.
M1
Speaker is on during call establishment, but off when receiving
carrier. (Default.)
M2
Speaker is always on.
M3
Speaker on after the last digit is dialed out and off when carrier is
detected.
MW
For USA NI-1 message waiting service, disable the audible &
feature message waiting.
O
Return to on-line state
Pn
n=0-6
D-channel protocol selection (USA) for American Version
P0 (*)
Northern Telecom proprietary ISDN
P1
National ISDN 1 (1 SPID)
P2
National ISDN 1 (2 SPID)
P3
Reserved