ZyXEL Communications omni.net Plus - Manual (Page 87)

Technical Reference for ZyXEL omni.net series
7-7
The second directory number is not necessary any more. The BACP/BAP is supported on the client
side only, and the server side of BACP/BAP will be implemented in an upcoming release.
BACP/BAP AT Commands Description
ATBP0 Disable BACP/BAP negotiation.
ATBP1 Enable BACP/BAP negotiation (default).
Table 41. BACP/BAP AT Commands
NOTE: The status of BACP/BAP negotiation can be saved in profile.
It is enabled after power on. The status can be changed only by the
power cycle of another [ATBP] command. [AT&F] and [ATZ] do
not change the status.