ZyXEL Communications omni.net Plus User Manual
Page 169
Technical Reference for ZyXEL omni.net series
B-17
All the Following Commands Require a 'AT' Prefix
S Com.
bit
dec
hex
Function and description
+Def./Ref.
16
10
Use Speech Bearer service whenever possible for POTS
port, Phone 2.
5
0 (*)
0
Use 3.1KHz Bearer service whenever possible for POTS
port, Phone 1.
32
20
Use Speech Bearer service whenever possible for POTS
port, Phone 1.
6
0 (*)
0
Enable the a/b adapter to accept global calls.
64
40
Forbid the POTS port to accept global calls.
7
0 (*)
0
Enable analog incoming calls.
128
80
Reject analog incoming calls.
(pure ISDN data).
S119= bit dec hex
0
0 (*)
0
Disable callback function (See 'AT*CG).
1
1
Enable callback function.
1 0
(*)
0 D-channel
layer-2(LAPD)
'point-to-multipoint'
operation
mode.
(dynamic TEI, 64 <= n <= 126).
2
2
D-channel layer-2(LAPD) 'point-to-point' operation mode.
(static TEI=0).
2
0 (*)
0
Disable 'overlap receiving' signaling function.
(for ISDN supplementary service 'MSN').
4
4
Enable 'overlap receiving' signaling.
(for ISDN supplementary service DDI).
3
0 (*)
0
When no MSN (EAZ) is matched, the inbound call will be
ignored.
Note: default = 1 for USA, default = 0 for other
8
8
When no MSN (EAZ) is matched, use default protocol to
accept.
4
0
0
V.110 user rate = 19200 bps if DTE speed greater than
19200 bps
16
(*)
10
V.110 user rate = 38400 bps if DTE speed greater than
38400 bps