Tips on rear panel connections - 13 – Hitachi 32FX41B User Manual

Page 13

Advertising
background image

TIPS ON REAR PANEL CONNECTIONS

- 13 -

1 Antenna Inputs (36CX35B)
The VHF/UHF terminal can be used for normal TV, cable TV (CATV), a video game, etc.

2 Antenna Inputs (Except 36CX35B)
The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and
ANT B. ANT A input can be displayed as a main picture or sub-picture. ANT B can only be displayed as a
main picture. (ANT B cannot be displayed as a sub-picture.) The antenna output labeled "TO
CONVERTER" allows the ANT A connection to pass directly to a different source such as a cable box.

3 Audio/Video Inputs 1, 2
The INPUT button will step through each video source and antenna source input each time it is pressed.
Use the audio and video inputs to connect external devices, such as VCRs, camcorders, laserdisc players,
etc. (If you have mono sound, insert the audio cable into the left channel jack.)

4 Monitor Out (Except 36CX35B)
These jacks provide fixed audio and video signals which are used for recording.

5 Audio to Hi-Fi
These jacks provide variable audio output to a separate stereo amplifier. With this connection, the audio to
the stereo can be controlled by the television's main volume. Use these jacks for the SURROUND Left and
Right channels. (See page 20.)

6 S-Video
Input 1 provides S-Video (Super Video) jacks for connecting equipment with S-Video output capability.

TIPS ON REAR PANEL CONNECTIONS

The S-Video connection is provided for high performance laserdisc players, VCRs etc., that have this
feature. Use this connection in place of the standard video connection if your device has this feature.

If your device has only one audio output (mono sound), connect it to the left audio jack on the TV.

Refer to the operating guide of your other electronic equipment for additional information on connecting
your hook-up cables.

A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot read its own video or line
output (INPUT: 1 in the example on page 15 or 16). Refer to your VCR operating guide for more
information on line input-output connections.

REAR PANEL CONNECTIONS (36CX35B ONLY)

Rear Panel Connections Illustration

Typical full feature set-up. Follow connections that pertain to your personal entertainment system.

REAR PANEL CONNECTIONS (EXCEPT 36CX35B)

Rear Panel Connections Illustration

Typical full feature set-up. Follow connections that pertain to your personal entertainment system.

EXTERNAL CONNECTIONS

CONNECTING EXTERNAL AUDIO AMPLIFIER

To control the audio level of an external audio amplifier with the remote control, connect the system as
shown below.

Advertising
This manual is related to the following products: