Hitachi 32FX41B - Manual (Page 36)

CUSTOM - 36 -
SIGNAL SOURCE mode (see page 39), when a channel is locked, it is locked on both antenna inputs.
When using TV TIME OUT make sure the clock is set (see page 43).
4 EVENT PROG.
This function will automatically turn the TV on and off, one time only, every day or once a week.
4 Event Prog. Screens
Press CURSOR to select PROGRAM 1, 2, 3 or 4.
Press CURSOR or to select the time the TV will turn on and off.
Use CURSOR or to change position.
Press CURSOR or to highlight then CURSOR to select MODE: ONCE (one time only) or
MODE: DAILY (TV will turn on/off at the same time every day), or MODE: WEEKLY (TV will turn
on/off at same time every week).
Press CHANNEL ( ) or ( ), or number buttons to set the channel the TV will tune to when it
automatically turns on.
Press EXIT to quit menu or CURSOR to return to previous menu, when the CURSOR is in the first
position.
If the clock is not set, you can not use this function and the screen below will appear.
NOTE: The OFF Timer will only activate if the TV was turned on by the ON Timer or tuned by the ON
TIMER, and no channel selection was made after this time. If a channel selection is made after after the ON
TIMER activates, the OFF Timer will automatically deactivate. If no remote control button is pressed after
the ON TIMER is activated, the TV will automatically turn off after three hours.
CAUTION: Do not use your TV as a deterrent when away from home by using the ON and
OFF TIMERS. For safety, the TV should be turned off when you are away from home.
AUTO LINK
Use this function to automatically turn the TV on and tune to VIDEO: 1, 2, or 3, when it detects a VIDEO
input.