Furuno GP-7000F - Manual (Page 12)

1. OPERATIONAL OVERVIEW
1-2
1.2 Loading an SD
TM
Chart Card
Your unit reads C-MAP NT + /NT MAX TM charts, stored on SD TM cards. Insert the
appropriate chart card for your area before turning the power on to show chart
data automatically.
Note 1:
Static electricity can be passed through your fingers to a card and
destroy the contents of the card. To prevent this, always touch a metallic
object, such as a steel desk, before handling an SD TM card.
Note 2:
Do not insert or remove a card while the power is on. This may cause
the equipment to freeze.
1. Push down the lid catch to open the card slot cover.
CLEAR BRILL
POWER
GOTO
WPT
SAVE
MOB
DISP
TO ENTER
PUSH
MENU
RANGE
Card slot cover
Lid catch
Card slot cover
2. Insert appropriate SD TM chart card label side up to any slot.
Inside SD chart card
label side up.
Insert
direction
SD
TM
chart card
3. Press the center of the lid catch to close the card slot cover, to protect the
chart drive. (Keep the slot cover closed at all times.)