Furuno GP-7000F - Manual (Page 22)

2. PLOTTER DISPLAY
2-2
2.1.2 Course-up
Press the COURSE UP soft key to show the course-up display. When
destination is set, it is at the top of the screen and the north mark appears at the
upper right side of the screen and points to north.
When destination is not set, the course is upward on the screen at the moment
the course-up mode is selected.
0001WP
1 nm
COURSE UP CENTER MAP SETUP SEARCH
N
NAV DATA
Plotter display, course-up mode
2.1.3 Auto course-up
Press the AUTO CSE UP soft key to show the automatic course-up display. The
course or heading is at the top of screen at the moment the auto course-up
mode is selected. When own ship is off its intended course by 30º (default
setting, this degree can be changed on NAVIGATION menu. For details, see
chapter 8.) or more, it is automatically brought back to perpendicular.
0001WP
1 nm
AUTO CSE UP CENTER MAP SETUP
N
SEARCH NAV DATA
Plotter display, auto course-up mode