Furuno GP-7000F - Manual (Page 86)

9. DATA TRANSFER
9-6
N NAME LENGTH WAYPOINTS
FIND NEW EDIT RENAME COMMENT
PLOT DELETE REVERSE COLOR SEARCH
SEND RECEIVE CONNECT SELECT REPORT
ROUTE LIST
Route list
7. For sending, press the cursor pad (▲▼) to choose the route desired.
8. Rotate the [ENTER] knob to choose SEND or RECEIVE at the bottom of the
screen.
SEND: Sending the route chosen at step 8 to external equipment.
RECEIVE: Receiving all routes to the internal memory from external equipment.
9. Press the [ENTER] knob to execute.
When the sending is completed, the message “User Points sending.” appears.
10. For receiving, do the operation for sending on the PC (or GP-7000/F).
When the receiving is completed, he message “Receiving completed” appears.
9.3 Waypoint, Route Format
You may transfer waypoint and route data to another GP-7000 series unit or a
PC in Standard or Furuno format, via the NMEA1 port, NMEA2 port or PC NMEA
IN port.
1. Press the [MENU] key to show the menu bar.
2. Rotate the [ENTER] knob to choose ADVANCED from the menu bar and then
push the [ENTER] knob.
3. Rotate the [ENTER] knob to choose INPUT/OUTPUT and then push the
[ENTER] knob.
4. Rotate the [ENTER] knob to choose WPL/RTE FORMAT and then push the
[ENTER] knob.
Standard
Furuno
5. Choose Furuno or Standard as appropriate and then push the [ENTER] knob.
Standard:
NMEA format WPL and RTE sentences are output when “SEND”
is executed to transfer waypoint list or route list.
Furuno:
Waypoint and route data in Furuno original format (P sentence) are
output when “SEND” is executed to transfer waypoint list or route list.
Waypoint color, shape and comment data are also sent.
6. Press the [MENU] key to close the menu.