Furuno GP-7000F - Manual (Page 25)

2. PLOTTER DISPLAY
2-5
2.4 Navigation Data Display
The navigation data display provides generic navigation data, and it is shown in
combination displays.
Appropriate sensors are required. Bars (- -) appear when corresponding sensor
is not connected.
LATITUDE
22º03.730N
LONGITUDE
137º57.870E
SOG
12.0KTS
COG
7º M
TRIP
111.5 nm
TEMP
10.3ºF
TIME
12:28 AM
DATE
Apr/17/04
DEPTH
22.5 Ft
Position
Trip meter Speed
Course
Depth Temperature
Navigation data display
Changing the information displayed
1. Press and hold the [MENU] key down for two seconds to show Speed in
reverse video.
2. Rotate the [ENTER] knob to show data in reverse video.
3. Press the [ENTER] knob to show the selection window as shown below.
SOG
COG
STW
HDG
DST
BRG
TRIP
DEPTH
TEMP
HDOP
VDOP
XTE
DRF
SET
WST
WDT WSA
WDA
DATE
TIME
TTG
ETA
DEST
Note: Contents may be changed
depending on data selected at step2.
4. Rotate the [ENTER] knob to choose the data to show, and then press it.
The item window (ex. units) appears.
5. Rotate [ENTER] knob to select the unit.
The data selected at step 2 changes to your selection.
6. Press the [CLEAR] key to erase the reverse video.