Oven cleaning, Self-clean cycle time length, Instructions press display – FRIGIDAIRE 318204125 User Manual

Page 17: Figure 1 figure 2 figure 3, The speed clean, Clean, And maxx clean, Cycle (2 hour) for light soils , a, Cycle (3 hour) for average soils , and a, For 2 hour or press

Advertising
background image

17

Oven Cleaning

TIMED
DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV
ROAST

BAKE
WARM

BROIL
PROBE

Figure 1

Figure 2

Figure 3

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV
ROAST

BAKE
WARM

BROIL
PROBE

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV
ROAST

BAKE
WARM

BROIL
PROBE

Self-Clean Cycle Time Length

The SPEED CLEAN

Speed

clean

, CLEAN

Clean

and MAXX CLEAN

Maxx

clean

pads control the Self-Cleaning feature. If you are

planning to use the oven directly after a self-clean cycle remember to allow time for the oven to cool down and the oven
door to unlock. This normally takes about one hour. So a 3 hour self-clean cycle will actually take about 4 hours to

complete. *It is recommend to use a

Speed

clean

cycle (2 hour) for light soils, a

Clean

cycle (3 hour) for average soils, and a

Maxx

clean

cycle (4 hour) for heavy soils (to assure satisfactory results).

During the Self-Cleaning cycle, the outside of the range can become very hot to touch. DO NOT leave small

children unattended near the appliance.

To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the

side of the oven when opening the door to allow hot air or steam to escape.

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and

avoid possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY HOT.

INSTRUCTIONS

PRESS

DISPLAY

Clean

Speed

clean

or

Maxx

clean

START

Start
time

4

3

0

START

To start an immediate Self-Cleaning cycle or to set a delay start time of 4:30 o'clock and shut
of automatically (example provided is a default 3 hour Self-Clean cycle):

1. Be sure the clock is set with the correct time of day, the oven is empty

and the oven door is closed.

2. Press

Clean

. "CLEAN" will flash and "3:00" HR will show in the display

(Figure 1). The control will automatically clean for a 3 hour period (default
self-cleaning cycle time). Note: If a 2 or 4 hour clean time is desired,

press

Speed

clean

for 2 hour or press

Maxx

clean

for a 4 hour clean time. Set the

cleaning time based on the amount of soil: light, medium or heavy (* See
above).

3. Press

START

.The "DOOR LOCKED" icon will flash; "CLEAN" icon

and the letters "CLn" will remain on in the display

(Figure 2).

4. As soon as the control is set, the motor driven oven door lock will

begin to close automatically. Once the door has been locked the
"DOOR LOCKED" indicator light will stop flashing and remain on.
Also, the oven icon will appear in the display (Figure 3).

Note: Allow about 15 seconds for the oven door lock to close.
NOTE: If the optional delay Self-Clean feature is needed, finish steps 5-7. If Self-Clean is started immediately

Figure 4

Figure 5

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV
ROAST

BAKE
WARM

BROIL
PROBE

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV
ROAST

BAKE
WARM

BROIL
PROBE

Figure 6

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV
ROAST

BAKE
WARM

BROIL
PROBE

skip the remaining steps and continue with "When the Self-Clean
cycle is done" on the following page.

5. Press

Start
time

. Enter the desired start time using the number pads

4

3

0

(Figure 4).

6. Press

START

. "CLn", "DELAY", "DOOR LOCKED" and "CLEAN" icons

will remain on (Figure 5).

7. The control will start the self-cleaning at the set start time, for the period

of time previously selected. At that time, the icon "DELAY" will go out;
"CLn" and oven icon will appear in the display (Figure 6).

Advertising
This manual is related to the following products: