FRIGIDAIRE 318204125 - Manual (Page 5)

5
Setting Temperature Display — Fahrenheit or Celsius:
The BROIL Broil and CLEAN
Clean
pads control the Fahrenheit or Celsius temperature display modes. The oven
control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory
to display in Fahrenheit.
Broil
for 7 seconds
START or Clear
/Off
Clear
/Off
INSTRUCTIONS PRESS DISPLAY
Consumer Defined Controls
(continued)
TIMED
DOOR DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST BAKE
WARM BROIL
PROBE
TIMED
DOOR DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST BAKE
WARM BROIL
PROBE
Figure 1
Figure 2
Figure 3
TIMED
DOOR DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST BAKE
WARM BROIL
PROBE TIMED
DOOR DELAY
LOCKED
TIMER
CLEAN
CONV
ROAST BAKE
WARM BROIL
PROBE
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press Broil
(Figure 1) and hold for 7 seconds; "550°" will appear and
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
2. Press
Clean
to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
3. Press START to accept the change or press Clear
/Off
Clear
/Off
to reject the
change.
Clean