Setting the clock, Setting timer, Setting continuous bake or 12 hour energy saving – FRIGIDAIRE 318204125 User Manual

Page 3: The timer on/off, Press, Is pressed, The display will return to the time of day, Continued), And clean, Press and hold

Advertising
background image

3

Setting Timer

The TIMER ON/OFF

Timer

On/O

Off

pad controls the Timer feature. The Timer serves as an extra timer in the kitchen that will

beep when the set time has run out. It does not start or stop cooking. The Timer feature can be used during any of the
other oven control functions. Refer to “Minimum and Maximum Control Pad Settings” for time amount settings.

Timer

On/O

Off

for 7

seconds

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

Figure 7

INSTRUCTIONS

PRESS

DISPLAY

INSTRUCTIONS

PRESS

DISPLAY

To set the Timer (example for 5 minutes)

1. Press

Timer

On/O

Off

. "- - - -" will appear and "TIMER" will flash in the

display (Figure 5).

2. Press the number pads to set the desired time in the display

(example

5

). Press

START

. The time will begin to count

down with "5:00" and "TIMER" will stay in the display (Figure

6). Note: If

START

is not pressed the timer will return to the

time of day after 25 seconds.

3. When the set time has run out, "End" and "TIMER" will show in

the display (Figure 7). The clock will sound with 3 beeps every

5 seconds until

Timer

On/O

Off

is pressed.

To cancel the Kitchen Timer before the set time has
run out

Press

Timer

On/O

Off

. The display will return to the time of day.

TIMED
DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV
ROAST

BAKE
WARM

BROIL
PROBE

TIMED
DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV
ROAST

BAKE
WARM

BROIL
PROBE

TIMED
DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV
ROAST

BAKE
WARM

BROIL
PROBE

TIMED
DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV
ROAST

BAKE
WARM

BROIL
PROBE

TIMED
DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV
ROAST

BAKE
WARM

BROIL
PROBE

TIMED
DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV
ROAST

BAKE
WARM

BROIL
PROBE

TIMED
DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV
ROAST

BAKE
WARM

BROIL
PROBE

Setting the Clock

(continued)

Setting Continuous Bake or 12 Hour Energy Saving

The TIMER ON/OFF

Timer

On/O

Off

and CLEAN

Clean

pads control the Continuous Bake or 12 Hour Energy Saving features.

The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven
control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for
Continuous Baking.

To set the control for Continuous Bake or 12 Hour
Energy Saving features

1. Press and hold

Timer

On/O

Off

for 7 seconds (Figure1). After 7 seconds

"12h" or "- -h" will appear in the display and the control will
beep once.

2. Press

Clean

to switch between the 12 Hour Energy Saving and

continuous bake features. Note: "12h" (Figure 2) in the display
indicates the control is set for the 12 Hour Energy Saving
mode and "- -h" indicates the control is set for the Continuous
Bake feature (Figure 3).

3. Press

START

to accept the change (Figure 4; display will return

to time of day) or press

Clear

/Off

Clear

/Off

to reject the change.

Clean

START

Timer

On/O

Off

5

START

Timer

On/O

Off

Timer

On/O

Off

Clear

/Off

Clear

/Off

Advertising
This manual is related to the following products: