Oven cleaning, Instructions press display, When the self-clean cycle is completed – FRIGIDAIRE 318204125 User Manual

Page 18: Stopping or interrupting a self-cleaning cycle, Continued), Figure 3, Figure 4, Figure 1 figure 2

Advertising
background image

18

Oven Cleaning

(continued)

INSTRUCTIONS

PRESS

DISPLAY

TIMED
DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV
ROAST

BAKE
WARM

BROIL
PROBE

Figure 3

When the Self-Clean Cycle is Completed

1. "Hot" will appear in the display with the time of day to indicate the

oven must cooled down before it can be used normally (Figure 1; or
Figure 2 if the clean cycle is used with the delay feature).

2. Once the oven has cooled down enough "Hot" message will

disappear, the oven door will unlock and "DOOR LOCKED" will
disappear from the display. The oven door can then be opened
(Figure 3).

Stopping or Interrupting a Self-Cleaning Cycle

If it becomes necessary to stop or interrupt a self-cleaning cycle due to
excessive smoke or fire in the oven:

1. Press

Clear

/Off

Clear

/Off

.

2. The oven door can only be opened after the oven has cooled down

for approximately 1 HOUR and "Hot" and "DOOR LOCKED" is no

Clear

/Off

Clear

/Off

longer displayed (Figure 3).

IMPORTANT NOTES when using the Self-Clean feature:
1. On some models, the Self-Clean feature will not operate whenever a radiant surface

remains ON.

2. On some models, starting a self-clean cycle will turn ON the Cooktop Lockout feature.

If it is the case the symbol will appear in the display (Figure 4) which will indicate
that the Cooktop Lockout feature is ON. The cooktop will remain locked until the Self-
Clean cycle has completed and the oven door has unlocked.

3. A Self-Clean cycle cannot be started if Oven Lockout feature is active.
4. If a Self-Cleaning Cycle has started but not finished and a power failure occurs, the

appliance may not have thoroughly cleaned. Once power is restored, the oven door
and the cooktop are unlocked. Then set for another Self-Clean cycle to finish.

5. If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can

never be set to start more than 12 hours in advance. To set for a delayed Self-
Cleaning cycle 12-24 hours in advance set the control for the 24 hour time of day
display mode.

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV
ROAST

BAKE
WARM

BROIL
PROBE

Figure 4

TIMED

DOOR

DELAY

LOCKED

TIMER

CLEAN

CONV
ROAST

BAKE
WARM

BROIL
PROBE

DOOR LOCKED

TIMER

CLEAN

CONV
ROAST

BAKE
WARM

BROIL
PROBE

Figure 1

Figure 2

Advertising
This manual is related to the following products: